If you have a bike store in your location then you understand how pricey it can be to get work done. Once a year, I even take my bike in for a total tune-up.
I do not utilize the store for whatever. Often I can make the repair work myself and conserve a little money and time.
Even without specialized tools, there is repair work you can do yourself, no matter what your level of experience. In this short article, I will teach you how to alter a bike chain without a chain tool.
It might appear complex, and there are elegant specialized tools to make the task simpler, however, there’s no requirement to be daunted.
You can alter your bike chain yourself, in the house, with tools you currently have, in under an hour. Keep checking out to see how!
Do you need to hang your bikes on your garage wall for more space? IF so check out our guide here
Removing the Master Link Without a Special Tool
To get the chain off of your bike, you’ll initially require to detach it.
While this is most convenient if your chain has a master link, and you have a set of chain pliers, it’s still basic if you do not.
If yours does, it won’t look the same as the rest.
You may have a set of needle-nose pliers little enough that you can utilize them like chain pliers. Utilize them to squeeze the chain links on either side of the slotted master link, so that the rivet slides in the slot. The slotted plate must come off quickly, and the chain will get detached.
If your pliers aren’t little enough, you can still get rid of the master link. By angling the pliers.
You can squeeze the slotted linking plate so that it comes straight off of the rivet. The chain will split up after that.
When you have actually detached the chain, you can pull it off of the gears. As you do this, take notice of how the chain is routed around the derailleurs and gears.. On some multi-speed bikes, this can be rather made complex. And you wish to ensure you get it right when you re-install the chain.. You might even wish to take an image with your phone before you eliminate the chain. If your chain does not have a master link, do not stress. You can still eliminate the chain without making use of a unique tool. Check out the next area for that info. Position your bike so that you can follow the actions while the chain is still on the bike. It’s a bit more bothersome, however, you can do it.
Removing a Chain Link Without a Special Tool
You’ll require several basic tools to get rid of a chain link without utilizing a chain breaker or other specialized tool:
Nail punch or anything strong with a little pointer. You require something that will drive the rivet out of the link when you tap it with the hammer. Even a little screwdriver might work for this.
Something tough with a 1/4 inch size hole through it. You might utilize a nut, a socket, or perhaps a piece of wood with a hole drilled into it.
Place the chain so that the rivet is straight over the hole in the nut, socket, piece of wood, or whatever else you’re utilizing.
If the chain is still on the bike, this will be harder, however possible. You’ll require to find out how to lay the bike down on its side so you can place the chain where you require it.
Next, location whatever you’re utilizing to drive the rivet.
A nail punch, screwdriver, and so on, as close to the center of the rivet as you can.. Tap the end of the punch, screwdriver, and so on with the hammer up until the rivet pops out of the chain. Repeat up until you’ve eliminated the link( s) you desire to get rid of.
Chain links have little ends and huge ends. You’ll require to end up with a little end and a huge end on either side of the chain so you can reassemble the chain.
If you get this incorrect, do not fret. Pop-out another rivet up until you get the completion that you require.
Putting the Chain Back on the Bike.
Position the chain over the gears, and path it through the derailleur. Make sure to copy the specific initial chain routing. If required, refer to the photo you took in the action above. The detached ends of the chain must now be suspending from the sprockets/derailleur. Linking the chain will be most convenient if you have a master link, however still simple even if you do not. If you have something that will hold the detached chain together, this action will likewise be simplest.
That will produce sufficient slack for you to deal with completions of the chain. A length of stiff wire or perhaps a sectioned piece of coat wall mount can do the technique. Loop completions of the wire or wall mount so that they get parts of the chain (4-6 lengths far from completions) and hold them in place.
Now, link the chain. If you have a master link, utilize it to link completions of the chain together. Bring the ends together and utilize the very same tools you utilized previously if you do not. This time it’s to place a rivet rather than eliminate it.
Getting Rid Of the Bike Chain.
Now that you understand how to alter a bike chain without specialized tools, you must learn about the readily available tools. If you’re going to be repairing chains a lot, they’re worth the financial investment.
Bike Chain Pliers.
Suitable for 7, 8, 9, 10, and 11-speed chains connector repair. high-quality steel, heavy-duty and durable.
2 in 1 combination Pliers for Remover/Install connection links. the safety pin protects from over opening, return spring keeps the pliers ready.
The chain pliers make opened and closed the chain easier, about 10s. Just takes 2-3 minutes to remove the split chain and Close again.
The handle part is made of coated rubber, very comfortable and with spring design for saving effort, non-slip, good grip handle
a 45-Day Money Back Guaranteed
If your bike chain has a master link, a set of bike chain pliers makes getting rid of the chain simple and fast.
To figure out if you have a master link in your chain, search for a link that looks a little bit various from the rest.
Every link in a chain is comprised of 2 fundamental parts: rivets and link plates.
A lot of link plates have a basic hole where the rivet goes through.
Master links have a slot in the linking plate rather than a hole.
Chain pliers squeeze the chain link together so that the rivet slides in the slot, and the chain quickly splits up.
Qomolo Bike Chain Tool, Universal Bike Chain Remover Tool Bike Chain Splitter 1 to 11 Speed Bike Chain Breaker, Bicycle Chain Cutter Repairing Removal Tool
The chain breaker is suitable for install pins in 7, 8, 9, 10, 11 and single-speed bicycle chains.
Specially designed for quick removal of your bike chain. Great repair tool for your outdoor cycling or emergency use.
The chain rivet tool was made of carbon steel, very strong and durable so there are no worries of its breaking or bending. The coated handle is very comfortable and anti-slip.
Built-in hook for holding the bike chain in place while performing maintenance. Easy to remove the chains. And it comes with a replacement pin. If the pin is broken, you can replace it easily.
The chain splitter tool has a compact design and is small for easy portability. If you have problems in use, feel free to contact our service team, we will help you to solve them within 24 hours.
A chain breaker is a basic tool that presses the rivet out of the chain link. You can utilize a chain breaker if your chain does not have a master link.
The chain breaker quickly detaches and eliminates the chain from the bike.
If you are thinking about taking a look at a chain breaker I extremely suggest having a look at this one on Amazon.
When the chain you’ve eliminated, you can likewise utilize the chain breaker to eliminate damaged links or additional links in the chain.
These specialized tools make the task much easier and will assist you conserve a little bit of time, however, they’re not needed.
Well done, you’re nearly prepared to hit the road! Before you do, you’ll desire to evaluate the chain a bit.
Turn the pedals, and move the bike through all its equipment. This will ensure the chain remains on the gears and runs as it should.
Bike stands are perfect for this, however not required. You can do a tiny road test, do not endeavor too far till you’re sure the chain is working correctly.
When you’re positive that the chain remains in good condition, it’s time to hit the road or your preferred path.
You conserved a lot of time doing all this work yourself versus taking the bike into the store.